Furnace & heating
AC repair
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterFurnace Repair in Long Beach, CA
Furnace repair in Long Beach typically costs between $150 and $450 for most jobs, depending on the part that’s failed, and many repairs can be completed the same day we diagnose the issue. That’s the straight answer. The longer answer is that a coastal climate like ours puts a specific kind of wear on furnaces: salt air corrodes electrical connections faster than inland homes, and the cool, damp nights we get from November through February mean your system cycles on and off more often than you might expect. At Dalton Heating & Air Long Beach, we repair furnaces with a written price before any work starts and a full-year written guarantee on every repair. If you’re dealing with a furnace that won’t fire up, call us at (562) 512-7423 and a live person answers, any hour, any day.
We’re part of the Heating & Furnace in Long Beach service line, which means our technicians are held to The Garrison Standard on every single call. Since 2003, that standard has meant one thing: arrive when we say we will, put the price in writing before touching a tool, do the job by the book, leave the site cleaner than we found it, and stand behind the work for a full year. Marco Benitez runs this location and he’s particular about that last part.
When You Need Furnace Repair
Some furnaces fail loudly. Others fail slowly and quietly until you’re paying more on your gas bill every month than you should be. Here are the scenarios we see most often across Long Beach, from Belmont Shore up to Bixby Knolls and over into Los Altos:
- The furnace runs but blows cold air. This typically points to a failed igniter, a tripped limit switch, or a gas valve that’s not opening correctly. In older homes near the coast, corrosion on the flame sensor is a frequent culprit.
- The system short-cycles: it kicks on, runs two or three minutes, shuts off, and repeats. That pattern usually means a clogged filter is starving the system for air, or a limit switch is reading an overheat condition. Left alone, short-cycling burns out the blower motor and the heat exchanger over time.
- You hear a loud bang or boom when the furnace starts. That’s delayed ignition: gas builds up in the burner chamber before the igniter fires. It’s a sign that burners are dirty or the igniter is weakening, and it should be addressed quickly.
- The blower runs constantly, even when the house is warm. The fan limit switch may be stuck in the “on” position, or a relay on the control board has welded itself closed. That constant draw adds up on your electric bill.
- Your gas bill climbed without a change in usage. A furnace that’s losing efficiency is often running longer to hit the same thermostat setting. That points to anything from a failing inducer motor to a heat exchanger that’s nearing the end of its service life.
- Yellow or flickering pilot light. In furnaces with standing pilots, a healthy flame burns blue and steady. Yellow flame means incomplete combustion, which is both inefficient and a carbon monoxide concern. We inspect that on the spot.
Carbon monoxide is not a joke. If your furnace is older or you suspect a cracked heat exchanger, and you don’t already have a CO detector installed, get one today. A heat exchanger crack is exactly the kind of failure that sends gases into living space instead of out the flue. This is also the reason we never recommend trying to patch a heat exchanger with a DIY sealant: it doesn’t hold and it can give you false confidence. That part either gets replaced properly or the furnace gets replaced.
Our Furnace Repair Process
When you call Dalton Heating & Air Long Beach, here’s what happens, step by step. No mystery, no surprises.
- You call (562) 512-7423 and a live person answers. You’ll describe what the furnace is doing. We’ll ask the right questions: how old the system is, what brand, whether you’ve changed the filter recently, and what the thermostat is set to. That conversation alone rules out a surprising number of no-heat calls.
- We give you a two-hour arrival window and we keep it. The Garrison Code includes arriving inside the stated window. Not “sometime between 8 and 5.” You’ll know before the technician rolls up who is coming, and that person is background-checked, uniformed, and factory-trained.
- The technician diagnoses the fault and explains it in plain language. You’ll hear the trade term and what it means for your system. If it’s the inducer motor, for example, we’ll explain that it’s the small fan that pushes exhaust gases out of your furnace and up the flue, and why it failed.
- You get a written price for the repair before any work begins. This is a non-negotiable part of The Garrison Standard. The price you see is the price you pay. We don’t add “shop fees” or “miscellaneous parts” at the end. What’s in writing is what’s billed.
- We complete the repair, test the full startup sequence, and clean the site. The technician confirms the system runs through ignition, heating, and shutdown correctly, then wipes down the furnace cabinet and sweeps up. The goal is that you couldn’t tell we were there except that the heat works.
- You receive a written guarantee covering the full repair for 365 days. If the same part fails within a year, we come back and fix it at no charge. That’s the 365-Day Done Right Promise, and it’s included with every furnace repair we do. No upgrades, no fine print.
We service furnaces from Carrier, Trane, Lennox, and Goodman among the nine major brands our factory training covers. That matters because parts availability, diagnostic sequences, and control-board logic differ meaningfully between brands. A technician who only knows one brand will scratch their head longer on the other eight. Our techs train across the whole line.
Furnace Repair Pricing in Long Beach
Most furnace repairs in Long Beach run between $150 and $450, depending on the part that failed and how accessible it is. Here’s a realistic breakdown of the common jobs we price every week:
- Flame sensor cleaning or replacement: $95 – $180. This is one of the most common no-heat fixes, especially in coastal neighborhoods where salt air oxidizes the sensor rod faster.
- Igniter replacement: $180 – $320. Hot-surface igniters are the part most likely to fail on any furnace, regardless of brand. They’re considered a wear item.
- Pressure switch replacement: $160 – $280. These small diaphragm switches fail often on systems with longer venting runs, which describes a lot of attics in the older housing stock around Bixby Knolls and North Long Beach.
- Inducer motor replacement: $350 – $650. The inducer moves exhaust gases. These motors are more expensive on high-efficiency furnaces from brands like Carrier and Lennox.
- Blower motor replacement: $400 – $750 depending on whether it’s a standard PSC motor or a variable-speed ECM. ECM motors are more efficient but expensive to replace if they fail out of warranty.
- Control board replacement: $350 – $600. Boards get damaged by voltage spikes and moisture. Near the coast, moisture is a real variable.
- Gas valve replacement: $300 – $500. The valve controls the flow of natural gas into the burners. These fail more often on furnaces that sit unused for long stretches, which happens in Long Beach where heat is needed only a few months a year.
- Thermostat replacement or upgrade: $150 – $400 installed. Often a no-heat call is actually a failed thermostat, not a failed furnace.
What changes the price: the brand of furnace, how old it is, whether parts are in stock locally or need to be ordered, and how difficult the unit is to access. A furnace jammed into a tight closet in a Belmont Shore bungalow takes longer to work on than one in an open garage in Los Altos. Labor rates are flat and disclosed in writing before we start.
If the repair cost is climbing north of $1,200 and your furnace is over 15 years old, the technician will be straight with you about whether replacement makes more sense. We won’t push you into a new system. We’ll lay out the numbers and let you decide. That conversation is free, and so is the estimate on any repair: call (562) 512-7423.
FAQs – Furnace Repair
How much does furnace repair cost in Long Beach?
Most furnace repairs in Long Beach run between $150 and $450 for common parts, with larger jobs like blower motors or inducer motors landing in the $350 – $750 range. The exact cost depends on the failed part, your furnace’s brand and age, and how accessible the unit is. We give you a written price before any work starts, so there’s no guesswork. Call (562) 512-7423 for a free estimate.
Can you fix my furnace the same day I call?
In most cases, yes. We stock common parts for the brands we service, including igniters, flame sensors, pressure switches, and thermostats, so a large share of repairs are completed on the first visit. If a specialized part has to be ordered, the technician will tell you that upfront and give you a realistic ETA. Call (562) 512-7423 and we’ll give you an honest answer about timing.
Is it cheaper to repair or replace my furnace?
As a rule of thumb, if your furnace is under 12 years old and the repair is under $500, repair makes sense. If the unit is over 15 years old and the repair quote is $1,200 or more, a replacement starts to make financial sense, particularly if the furnace has a standing pilot or is rated at 80% AFUE or lower. We’ll show you the numbers for both options and let you decide without pressure.
What brands of furnaces do you work on?
Our technicians are factory-trained to service Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard furnaces. If your furnace is one of those brands, we have experience with its specific control logic, parts availability, and common failure points. If it’s a brand not on that list, call us anyway and we’ll tell you honestly whether we can help.
Call Dalton Heating & Air Long Beach
If your furnace is down or acting up, call (562) 512-7423. A live person answers 24 hours a day, and we’ll schedule a technician to arrive inside a stated two-hour window. You’ll get a written price before the work starts, a written 365-day guarantee when it’s done, and a crew that leaves your home clean. That’s The Garrison Standard, applied to every furnace repair call we take in Long Beach. From Naples Island to North Long Beach, we show up on time and stand behind the work.
Written by Marco Benitez, Owner at Dalton Heating & Air Long Beach, serving Long Beach.