Furnace & heating
AC repair
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Furnace Replacement Cost in Long Beach?
Furnace replacement in Long Beach, CA typically costs between $4,200 and $9,800 for a complete system in 2026, including equipment and installation. Most single-family homes in neighborhoods like Bixby Knolls, Los Altos, and Naples fall in the $5,000 – $7,500 range for a mid-efficiency gas furnace. The final number depends on furnace type, home size, and whether ductwork needs modification.
If your furnace is 15 years old or older and repairs are stacking up past $700, replacement usually makes more financial sense than another patch job. We’ll break down exactly what drives that price in Long Beach, street by street.
Furnace Replacement Cost Breakdown (2026)
Here’s what you’re actually paying for when you replace a furnace in Long Beach. These are real market numbers as of 2026, not national averages that don’t apply to coastal Southern California pricing.
| Line Item | Typical Long Beach Cost | Notes |
|---|---|---|
| Furnace unit (mid-efficiency, 80% AFUE) | $1,600 – $2,900 | Goodman, Rheem, York, Bryant, Carrier base models |
| Furnace unit (high-efficiency, 90 – 96% AFUE) | $2,600 – $4,800 | Trane, Lennox, Daikin, top-tier Carrier |
| Installation labor | $1,400 – $2,800 | Includes removal of old unit, gas connections, venting checks |
| Permits and city inspection | $250 – $500 | Required by the City of Long Beach for gas line and mechanical work |
| Duct modification or replacement (if needed) | $600 – $3,500 | Higher if your ductwork is original to a 1950s – 1960s home |
| Thermostat upgrade | $100 – $300 | Smart thermostat if you want it; basic digital otherwise |
| Old furnace removal and disposal | $100 – $250 | Often bundled into installation labor |
Total typical range: $4,200 – $9,800, with most Long Beach homes landing between $5,000 and $7,500.
What pushes you toward the high end? A larger home in El Dorado Park or Park Estates that needs a bigger BTU furnace, ductwork that’s hit the 40-year mark, or a high-efficiency unit with a variable-speed blower. What keeps you lower? A smaller ranch in Los Altos or a condo in Downtown Long Beach where the furnace is a closet or attic unit with straightforward access.
What Affects Furnace Replacement Pricing in Long Beach
Furnace pricing is not one-size-fits-all, and in Long Beach the spread is real. Here are the factors that move the number.
- Furnace efficiency rating (AFUE). An 80% AFUE unit (that’s Annual Fuel Utilization Efficiency, or how much gas actually becomes heat) costs less up front but burns more gas each winter. A 96% AFUE condensing furnace costs $1,000 – $2,000 more at installation, but in a Long Beach bungalow where the furnace runs four months a year, the payback period can stretch. We don’t upsell efficiency for its own sake. We do tell you the honest math.
- Home size and BTU output. A 1,200-square-foot home in Zaferia needs a 60,000 – 80,000 BTU furnace. A 2,800-square-foot home in Virginia Country Club needs 100,000+ BTU. Bigger units cost more, and installing one often means upgrading the gas supply line.
- Furnace location in the home. Closet or attic installations common in Alamitos Beach and Belmont Shore condos take longer because of tight access, which adds labor. A garage or basement furnace, more common in the single-family homes north of the 405, is faster and cheaper to swap.
- Ductwork age and condition. Many Long Beach homes south of Willow Street were built in the 1940s and 1950s. Ductwork from that era often leaks 20 – 30% of heated air before it reaches the register. If yours is original or rusted, adding $1,500 – $3,500 to the job makes sense now rather than heating the crawlspace for another decade.
- Permit requirements. The City of Long Beach requires a mechanical permit and, for gas furnaces, a plumbing/gas check. Permits run $250 – $500 depending on scope. Any contractor who says you don’t need one is cutting a corner that will bite you when you sell the house. We pull permits on every furnace replacement.
- Brand and equipment tier. We’re factory-trained on nine brands: Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. Goodman and York tend to be the best value for a straightforward swap. Carrier and Trane run higher on equipment cost. The brand matters less than the installation quality, but some homeowners want a specific nameplate. We’ll quote whichever you ask for.
Is It Cheaper to Repair or Replace a Furnace in Long Beach?
The rule of thumb we use with homeowners: multiply the repair cost by the furnace’s age. If your furnace is 12 years old and the repair quote is $600, you’re looking at a 12 × $600 decision. That’s the point where replacement starts to win. Most furnaces in Long Beach last 15 – 20 years, but salt air near the coast can accelerate rust on heat exchangers, especially in homes within a mile of the beach.
If your furnace is under 10 years old and the repair is under $500, repair it. If it’s over 15 years old and the repair is over $700, replace it. In between, get a real diagnosis from someone who’s not trying to sell you a box. Our technicians are paid to fix, not to sell, and the written repair estimate you get includes a written guarantee for a full year. If that repair fails within the year, the return visit is free. That’s part of The Garrison Standard, and it’s non-negotiable at every Dalton Heating & Air location.
Furnace Replacement Process: What Actually Happens
If you’ve never replaced a furnace, here’s the sequence from first call to final inspection. Knowing what’s coming takes the guesswork out of the day.
- Estimate visit. A background-checked, uniformed technician comes to your home, measures the space, inspects the existing furnace and ductwork, and checks the gas line. You get a written price before any work starts. Not a ballpark, not a range. A written number. This is the only way we do estimates at Dalton Heating & Air.
- System selection. We walk through furnace options by efficiency, brand, and price. You pick. We don’t push. If you want a second opinion, the written estimate holds for 30 days.
- Permit filing. We file the mechanical permit with the City of Long Beach. This is included in the quote, not added on later.
- Installation day. We arrive inside the stated window. The old furnace comes out, the new one goes in. Gas connections, venting, electrical, and the condensate drain get checked against code. If a modification is needed to make the install right, it gets done and documented.
- Startup and testing. We fire the new furnace, check gas pressure, verify safety switches, measure airflow, and make sure the thermostat is communicating correctly. You get a walkthrough before we leave.
- City inspection. The City inspects the mechanical work. We coordinate scheduling and are present for the inspection. If anything fails, we fix it. The 365-Day Done Right Promise covers parts and labor for a full year from install.
We leave the site clean. That means no stray sheet metal screws, no filter wrap, no tape. It’s part of The Garrison Code: arrive inside the stated window, price in writing before starting, do the job by the book, leave the site clean, and stand behind the work for a full year.
How to Save on Furnace Replacement in Long Beach
You don’t have to pay top dollar to get a solid furnace installed right. Here’s where you can trim without cutting safety or quality corners.
- Replace in spring or fall. Furnace demand in Long Beach is seasonal. Contractors are busiest November through January. Schedule the job in March or April, or September to October, and you’ll have easier scheduling and sometimes better equipment pricing from distributors. You’ll also have a furnace that works before the next cold snap instead of discovering it’s dead on the first 45-degree December morning.
- Stick with an 80% AFUE unit if your home is smaller. For a 1,000 – 1,400-square-foot home in Naples or Alamitos Heights, the gas savings from a high-efficiency furnace don’t always justify the $1,500 – $2,000 price jump. We’ll show you the numbers both ways and let you decide. Occasionally the equipment rebates from Southern California Gas Company tip the scale.
- Get three quotes, but compare them honestly. Three quotes only help if you’re comparing the same scope. A $4,800 bid that skips permits and doesn’t include a warranty is not cheaper than a $5,900 bid that includes both. Look at what each estimate actually includes. We always include permits, furnace removal, startup testing, and a written full-year guarantee. No add-ons at the end.
- Check the furnace you already have. Before you commit to replacement, get a proper diagnosis. We’ve quoted replacements where the actual issue was a dirty flame sensor, a $150 – $300 fix, and the furnace had years left. Furnace repairs in Long Beach run $150 – $700 depending on the part. Call (562) 512-7423 for a free estimate and we’ll tell you honestly whether repair or replacement makes more sense.
- Don’t skip the tune-up on the new unit. A $80 – $200 annual tune-up keeps the heat exchanger clean, catches small issues before they become a $700 repair, and extends equipment life. Skipping maintenance to save money is the most expensive way to save money in HVAC.
Furnace Brands We Install in Long Beach
We service and install all nine major residential HVAC brands: Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. That’s not a marketing line. It means we don’t have to twist one brand to fit every house. If a Goodman is the right value for a rental property in Cambodia Town, we say so. If a Trane variable-speed is worth it for a 2,600-square-foot two-story in Bixby Knolls, we say that too.
Our technicians are factory-trained on each brand, which matters more than most homeowners realize. A Carrier furnace with a specific ignition sequence and a Daikin with a different control board are not interchangeable. We know the wiring diagrams and service bulletins for all nine.
How Furnace Replacement Costs Differ by Long Beach Neighborhood
Long Beach spans older craftsman homes closer to the water, mid-century stretches across the north side, and newer builds east of the Traffic Circle. The home styles in each area affect furnace cost in specific ways.
Belmont Shore and Naples: Homes here are often two-story and built in the 1930s – 1950s. Furnaces are frequently in attic spaces or tight utility closets. Labor runs higher because access is tighter. Salt air means heat exchangers and flue pipes corrode faster, which is why we see more full replacements than rebuilds in this strip.
Los Altos and Plaza: Single-story ranch homes from the 1950s make furnace access straightforward. Ductwork is often original, so expect a ductwork conversation when quoting a replacement. This area tends to land in the $4,800 – $6,500 zone for a straight furnace swap.
Bixby Knolls and California Heights: Larger, better-kept homes with newer construction or significant remodels. Some have original gravity furnaces from the 1930s that need complete removal plus new ductwork. A standard replacement runs $5,000 – $7,500. A gravity furnace conversion can hit $10,000 plus.
El Dorado Park and Park Estates: The homes are bigger, 2,000 – 3,500 square feet. BTU requirements push furnace sizing up to 100,000 – 120,000. Expect $6,500 – $9,800 for a complete replacement with high-efficiency equipment.
Downtown and Alamitos Beach: Condos and apartments with closet or wall-mounted furnace setups. These are complex access jobs even when the unit itself is small. Labor time is higher because the technician is working in a confined space with limited airflow to the unit. Prices range $4,500 – $7,000.
If you’re in a part of Long Beach we didn’t mention, the same neighborhood logic applies: older home with tight access and original ductwork runs higher. Newer home with a clean mechanical space runs lower. Your free estimate gives you a fixed price based on your exact house, not an average for the ZIP code.
Frequently Asked Questions – Long Beach Furnace Replacement Cost
How much does it cost to replace a furnace in Long Beach, CA?
A complete furnace replacement in Long Beach typically costs $4,200 – $9,800, with most mid-size homes falling between $5,000 and $7,500 for equipment, labor, permits, and removal of the old unit. The exact number for your home depends on furnace efficiency, home size, and ductwork condition. Call (562) 512-7423 for a free written estimate.
What is the cheapest furnace replacement cost in Long Beach?
The cheapest complete furnace replacement in Long Beach runs around $4,200, which covers a mid-efficiency unit in a smaller home with good existing ductwork and direct furnace access. A condo or small ranch home with a closet furnace can sometimes come in slightly under that. If you see quotes well below $4,000, check whether permits and removal are included.
How long does a furnace replacement take?
A standard furnace replacement takes 6 to 8 hours on installation day, with most jobs completed inside a single day. Small attic or closet units can take longer due to tight access. The city inspection typically follows within 1 to 2 weeks after installation, depending on City of Long Beach scheduling.
Is a permit required to replace a furnace in Long Beach?
Yes, the City of Long Beach requires a mechanical permit for furnace replacement, and gas furnace work also falls under gas line inspection requirements. Permits cost $250 – $500 and are included in every quote from Dalton Heating & Air Long Beach. We file the permit, schedule the inspection, and are present when the city inspector comes.
Should I repair or replace my furnace?
If your furnace is over 15 years old and the repair quote is over $700, replacement is usually the better financial move. Furnace repairs in Long Beach run $150 – $700 depending on the part. A failed heat exchanger, which costs $1,200 – $2,500 to repair, almost always points to replacement instead. We diagnose honestly and quote both options when the math is close.
Can I get a free furnace replacement estimate in Long Beach?
Yes. Dalton Heating & Air Long Beach provides free estimates with a written price before any work starts. Call (562) 512-7423 to schedule a visit. A live person answers the phone 24/7, a uniformed background-checked technician shows up inside the stated window, and the price you get in writing is the price you pay.
Get a Free Furnace Replacement Estimate in Long Beach
If your furnace is aging out and you want a real price for your specific home, not an online estimate that shifts when the crew arrives, call us at (562) 512-7423. Dalton Heating & Air Long Beach has been operating under The Garrison Standard since 2003, and every job starts the same way: a written price before any work begins, a clean work site when we leave, and a furnace replacement in Long Beach that stands behind the work for a full year. Marco Benitez and the Dalton team cover every corner of Long Beach, from the Peninsula to Bixby Knolls.
Pricing reflects the Long Beach market as of 2026. Dalton Heating & Air Long Beach offers free estimates – call (562) 512-7423.
Written by Marco Benitez, Owner at Dalton Heating & Air Long Beach, serving Long Beach since 2003.
What Our Customers Say
"Blower motor died on the coldest night. They had the part on the truck and had us warm again the same day."
- Sandy G."Installed a heat pump to replace an old oil furnace. Three clear quotes and the install crew was tidy."
- Cheryl B."Good communication, tidy, and disciplined work. Taped off the floor and wiped the unit down."
- Karen J.