Furnace & heating
AC repair
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateFast, Reliable Furnace Repair Across Stanton
Furnace repair in Stanton typically runs $150 – $700, and most calls we handle in this city are diagnosed and fixed the same day. That range covers everything from a failed ignitor to a heat exchanger replacement on a 1960s unit. If your system is down, call (562) 512-7423 and a live person answers, 24/7.
We know Stanton homes differently than a general contractor ever could. Most of the houses here went up between 1950 and 1970, built on slab foundations with mechanical closets that were sized for a different era. That changes how we approach every repair. A furnace that works fine in a newer Westminster house can fail differently in a Stanton tract home because the ductwork, the closet clearance, and the original electrical panel all date back to the Eisenhower administration. Our crews dispatch from the Los Angeles office but serve Stanton directly, and we arrive knowing what to expect before we open the closet door.
Why Dalton Heating & Air Long Beach Is Stanton’s Preferred Furnace Repair Company
Stanton homeowners call us because we put the price in writing before any work starts. That’s not a special request; it’s The Garrison Standard, and every Dalton technician operates under it. The quote you approve is the price you pay. If the repair fails within a full year, we return at no charge. Not a 30-day window. A full 365 days.
Marco Benitez runs our operation, and he holds every tech to The Garrison Code: arrive inside the stated window, diagnose honestly, do the job by the book, leave the site clean, and stand behind the work. Our technicians are background-checked and uniformed. You’ll know who’s coming before they pull up. And when you call, a person answers. No voicemail queue, no callback window.
We service all nine major residential HVAC brands: Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. For Stanton specifically, that matters because older Goodman and Rheem units from the 1980s and 1990s are still common in the tract homes south of Cerritos Avenue. Our techs are factory-trained on those systems, and we keep common parts stocked locally so a repair doesn’t drag into next week.
Styles & brands we work with
Heating Repair in Stanton
Heating repair in Stanton often starts the same way: a homeowner notices the burners light, the blower runs, but the air coming out of the registers is barely warm. In a 1960s slab-on-grade house, that symptom often points to a cracked heat exchanger or a blower motor that’s lost a speed winding. We diagnose the exact failure, write the repair cost on paper, and get the work done.
Heat Exchanger and Limit Switch Repairs
Stanton’s older furnaces run hot, especially when original ductwork restricts airflow. That stress causes heat exchangers to crack and high-limit switches to trip. We inspect with a combustion analyzer, not just a visual glance. If the exchanger is compromised, we’ll tell you plainly whether repair makes sense or replacement is the honest call.
Ignitor and Gas Valve Replacement
When an ignitor fails, the furnace clicks but never lights. It’s a $180 – $350 repair in most Stanton homes, depending on the furnace model. Gas valves run higher, usually $350 – $700 installed. We carry hot surface ignitors for the major brands on our trucks because it’s the most common mid-season failure we see from Katella Avenue to the Garden Grove border.
Boiler Repair in Stanton
Boiler repair in Stanton is less common than furnace work, but the older homes around the 90680 ZIP still have hydronic systems, especially the few custom builds mixed into the postwar tracts. We work on gas-fired boilers, circulator pumps, zone valves, and expansion tanks. Repair costs here run $150 – $700, same as our furnace work, because the labor and diagnostic process are similar.
Circulator Pump and Zone Valve Service
A boiler that fires but doesn’t circulate heat usually has a failed circulator pump or a stuck zone valve. In Stanton’s older hydronic systems, sediment buildup from 50-year-old cast iron pipes often shortens pump life. We test the electrical draw, check the impeller, and replace only what’s actually failed.
Expansion Tank and Pressure Issues
Low pressure in a boiler system is often a waterlogged expansion tank. It’s a straightforward fix, but in a Stanton slab home, the boiler is usually tucked in a garage corner with limited clearance. Our techs are used to working in tight spots, and we’ll leave the area cleaner than we found it.
Trusted Brands We Service in Stanton
We repair furnaces and boilers from Carrier, Trane, Lennox, and Goodman, along with the other five brands our techs are factory-trained on. Because Stanton has so many mid-century homes, we see a lot of original Lennox and Goodman equipment still in service. We stock ignitors, flame sensors, pressure switches, and control boards for those brands so most repairs happen in one visit. If a part isn’t on the truck, our Los Angeles parts network gets it to Stanton the same day.
Common Furnace Repair Problems We See in Stanton Homes
- High-limit trips on hot days. A furnace that trips its limit switch in July usually isn’t a furnace problem at all. Leaky duct connections in low-pitch attics pull in 110°F attic air, making the blower run nonstop and tripping the safety. We test static pressure before condemning the furnace.
- Undersized ductwork starving modern furnaces. Original 1950s duct runs in Stanton slabs were sized for 60,000 BTU furnaces with loose tolerances. A modern two-stage furnace on that same ductwork can overheat and shut down. We measure airflow and recommend duct modifications or a properly matched single-stage unit.
- Tight mechanical closets. Homes south of Katella Avenue often have furnace closets not much wider than the unit itself. Standard-width replacements don’t fit. We specify compact upflow models or side-yard package units, which means measuring before we quote any replacement.
- Electrical panels with no breaker space. Many Stanton homes still run 60-amp panels. When a new furnace shares a circuit with a condenser, it can trip. We routinely add subpanels or reconfigure circuits so your repair doesn’t become an electrical headache later.
See the difference
Before
After
Before
After
Before
AfterPricing for Furnace Repair in Stanton, CA
Here’s what furnace and boiler repair costs look like in Stanton right now:
| Service | Typical Cost Range |
|---|---|
| Furnace Repair | $150 – $700 |
| Boiler Repair | $150 – $700 |
The spread reflects parts cost. A flame sensor cleaning or capacitor replacement sits at the low end, around $150 – $250. A gas valve or blower motor lands in the middle. A heat exchanger replacement, if the furnace is worth saving, reaches the top of the range. Every quote is written before we start, and every repair carries the 365-Day Done Right Promise. If it fails within a year, we come back at no charge. Call (562) 512-7423 for a free estimate, and you’ll get an exact number, not a guess.
We Also Serve Cities Near Stanton
Dalton Heating & Air handles Furnace Repair throughout Stanton and the surrounding communities. If you’re in Cypress, Buena Park, Westminster, or Los Alamitos, our crews are already working in your area. The same written pricing, the same guarantee, the same live phone support. When a furnace fails, the city on your address shouldn’t determine the quality of the repair you get, and with us, it doesn’t.
Serving Stanton, CA - Our Local Coverage Area
We’re based in the Stanton area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Stanton
Most standard high-efficiency furnaces are 17.5 inches wide or larger, so a true 17-inch closet usually rules them out unless we modify the opening or relocate the unit. That’s why we measure before we quote. In many Stanton homes, we specify a compact 80% AFUE upflow furnace that slides into the existing footprint, or we move the system to a side-yard package unit. Neither option is a downgrade; both are the right tool for the house. Call (562) 512-7423 and we’ll measure your closet and give you a written recommendation.
Because your blower is likely running for the air conditioning, and it’s pulling hot attic air through leaky duct connections. That overheats the furnace cabinet and trips the high-limit safety even though the burners aren’t lit. The fix is usually duct sealing or a return air modification, not a new furnace. We diagnose this regularly in Stanton homes with low-pitch attics and original ductwork.
Yes, we repair wall furnaces, including the older gravity and forced-air models still common in Stanton’s smaller tract homes. Parts for some 1960s-era units are discontinued, and we’ll tell you that straight. If repair isn’t practical, we can quote a ductless mini split that heats and cools without touching the slab or tearing out walls. Either way, the diagnosis and quote are free. Call (562) 512-7423.
Many Stanton homes from the 1960s were built with horizontal package units mounted on the side of the house, doing air conditioning only. The cleanest fix is a heat pump package unit installed in the same footprint, which gives you both heating and cooling without adding a furnace closet. We handle that installation, and we size it to your existing ductwork so you don’t end up with the same airflow problems a larger unit would cause.
You should always run a load calculation, especially in Stanton where original ductwork was often undersized. Swapping the same BTU rating assumes the original install was correct, and on slab-on-grade tract homes from the 1950s and 1960s, that’s frequently not true. A Manual J load calculation tells us what your house actually needs; a Manual D tells us what the ducts can deliver. We include both in every replacement quote. It’s the only honest way to size a furnace, and you’ll see the numbers on paper before you commit.
Ready for Honest Furnace Repair in Stanton?
If you’re dealing with a furnace that won’t light, a blower that won’t stop, or a system that shuts down in the middle of a cold night, call Dalton Heating & Air Long Beach at (562) 512-7423. You’ll get a real person on the line, a clear diagnostic plan, and a written price before any work begins. We serve all of Stanton, from the older streets south of Katella to the newer developments near Cerritos Avenue. Free estimates, same-day service when possible, and a full year of coverage on every repair.
Written by Marco Benitez, Owner at Dalton Heating & Air Long Beach, serving Stanton, CA.